Chromatherapy Operation (H2 Models Only); User Keypad "Sleep" Modes - Kohler K-1394 Manuel D'instructions

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Chromatherapy Operation (H2 Models Only)

NOTE: Chromatherapy may be used with all modes of operation. Chromatherapy may also be used when
the pumps are not operating.
Chromatherapy Cycle -When this mode is activated, the chromatherapy lights will automatically and
continuously cycle through all eight colors: white, violet, indigo blue, aqua blue, green, yellow, orange,
and red. One cycle through all eight colors takes approximately one minute.
Rotate the outer ring on the keypad to select this mode and press "OK" to activate it.
Press "OK" while the chromatherapy mode is active to turn off this mode.
Chromatherapy Specific Color Selection - When this mode is activated, you may choose a specific color
for the bath.
Rotate the outer ring on the keypad to select this mode and press "OK" to activate it.
Use the up or down arrows to reach the desired color and press "OK" to activate the desired color.

User Keypad "Sleep" Modes

To enhance your bathing experience, the keypad is programmed to darken after approximately 15
seconds of inactivity. Only the last feature selected will remain illuminated. To resume normal
operation, press any key or turn the outer ring.
Approximately 60 seconds after all equipment is turned off, the keypad will darken completely to
conserve power. Press the power button or turn the outer ring to reactivate the keypad.
Kohler Co.
All manuals and user guides at all-guides.com
7
1022209-5-D

Publicité

Table des Matières
loading

Table des Matières