Data Protection - OPED VACOped Diabetic Mode D'emploi

English
VACOped Diabetic
Technical data / parameters
Materials used:
Hard lower shells (PP); Liners (cotton/PU foam/PA-Velour); Cushion sleeve (PVC); Filler material (EPS
spheres); Strap (PP fabric); Sole (EVA); Insole (PU); Upper shell (PP/PU). All parts and components are
latex-free. Note: Not made from natural rubber latex.
Transport conditions / storage conditions / disposal
Storage: Store in a dry and hygienic place and protect from direct sunlight.
Germany/Switzerland: The medical device is a rental product and
must be returned to OPED!
Other countries: Please dispose of the medical device in
residual or household waste.
Warranty
The warranty is provided in line with statutory regulations. In addition to these, the terms
and conditions of business of OPED GmbH also apply, where permissible.

Data protection

Information about the processing of your personal data can be found under:
http://oped.de/support/ihre-daten/.
Information about the processing of your personal data can be foudn under:
http://oped.ch/kontakt/ihre-daten/.
In the event of complaints relating to the product, such as damage or problems with
the fit, please contact the manufacturer directly. Only serious events which can lead to
a significant deterioration in health or death should be reported to the manufacturer
and the responsible authorities of the member state. Serious events are defined in
Article 2 (65) of Directive (EU) 2017/745 (MDR).
Your OPED Team
16
English
17