Personnel Qualification; Skilled Personnel; Special Hazards - WIKA DELTA-plus Mode D'emploi

2. Safety

2.2 Personnel qualification

EN

Skilled personnel

Skilled personnel are understood to be personnel who, based on their technical
training, knowledge of measurement and control technology and on their experi-
ence and knowledge of country-specific regulations, current standards and direc-
tives, are capable of carrying out the work described and independently recognis-
ing potential hazards.

2.3 Special hazards

6
WARNING!
Risk of injury should qualification be insufficient!
Improper handling can result in considerable injury and damage
to equipment.
The activities described in these operating instructions may
■
only be carried out by skilled personnel who have the qualifica-
tions described below.
WARNING!
For hazardous media such as oxygen, acetylene, flammable or
toxic gases or liquids, and refrigeration plants, compressors, etc.,
in addition to all standard regulations, the appropriate existing
codes or regulations must also be followed.
WARNING!
Residual media in dismounted measuring instruments can result in
a risk to persons, the environment and equipment.
Take sufficient precautionary measures.
WARNING!
The maximum surface temperature of the instrument may not
exceed the ignition temperature of flammable media.
Take sufficient precautionary measures.
WIKA operating instructions DELTA-plus, DELTA-comb and DELTA-switch