Upgrading Software - Samsung HT-E3500 Guide D'utilisation

Settings

Upgrading Software

The Software Upgrade menu allows you to
upgrade the product's software for performance
improvements or additional services.
• Never turn the product off or back on manually during
the update process.
1 · In the Home menu, select Settings, and then
press the E button.
2 · Select Support, and then press the E
button.
3 · Select Software Upgrade, and then press
the E button.
4 · Select one of the following methods:
• By Online
• By USB
• Auto Upgrade Notification
5 · Press the E button.
Directions for each method begin below.
NOTE
| |
\ The update is complete when the product turns off
after restarting. Press the POWER button to turn on the
updated product for your use. Never turn the product on
or off manually during the update process.
\ Samsung Electronics takes no legal responsibility for product
malfunction caused by an unstable Internet connection or
consumer negligence during a Software Update.
\ If you want to cancel the upgrade while the upgrade
software is downloading, press the E button.
By Online
Your product must be connected to the Internet
to use the By Online function. Remove all discs
before you begin.
1 · Select By Online, and then press the E
button. The Connecting to Server message
appears.
2 · If an update is available, a popup message
appears asking if you want to upgrade.
If you select Yes, the product turns off
automatically, turns on, and then begins the
upgrade.
IMPORTANT
| |
\ Never turn the home theater on or off manually during a
software upgrade.
28
|
English
3 · The update progress popup appears. When
the update is completed, the product turns
off automatically again.
4 · Press the POWER button to turn on the
product.
NOTE
| |
\ The update is complete when the product turns off
after restarting. Press the POWER button to turn on the
updated product for your use.
\ Never turn the product off or on manually during the
update process.
\ Samsung Electronics takes no legal responsibility for
a product malfunction caused by an unstable internet
connection or consumer negligence during software upgrade.
By USB
1 · Visit www.samsung.com.
2 · Click SUPPORT on the top right of the page.
3 · Enter the product's model number into the
search field, and then click Find Product.
4 · Click Get downloads in the center of the
page below the Downloads header.
5 · Click Firmware in the center of the page.
6 · Click the ZIP icon in the File column on the
right side of the page.
7 · Click OK in the pop-up that appears to
download and save the firmware file to your PC.
8 · Unzip the zip archive to your computer. You
should have a single folder with the same
name as the zip file.
9 · Copy the folder to a USB flash drive.
10 · Make sure no disc is inserted in the product,
and then insert the USB flash drive into the
USB port of the product.
11 · In the product's menu, go to Settings >
Support > Software Upgrade.
12 · Select By USB.
NOTE
| |
\ There should be no disc in the product when you upgrade
the software using the USB Host jack.
\ Never turn the product off or on manually during the
update process.
\ When the Software Update is done, check the software
details in the Software Upgrade menu.