Ega Master AQUAMaster 79902 Manuel D'instructions page 32

Furthermore we recommend giving the hidraulyc impact wrench a general overhaul by the supplier once a year.
After completing maintenance and repair work and before restarting production make sure that...
• All materials, tools and other equipment which are required for maintenance or repairs have been removed
from the work area of the machine.
• Any fluid leaks have been removed.
• All safety devices on the machine have proper function.
• Fixtures of screw connections are tight
• Removed covers, screens or filters were reinstalled
The employer ensures that all maintenance, inspection and assembly work is done by authorized and qualified
experts.
Maintenance and repair
Disassembly and re-assembly should be done according to the exploded views, respectively the sectional
drawings (see repair instruction).
All work regarding disassembly and re-assembly, as well as maintenance and repair have to be executed by
skilled staff only.
DANGER – Working with the machine without appropriate preparation and disregarding of instructions.
Shut down the machine properly and let it cool down to the ambient temperature.
NOTICE – Special instructions apply for the repair of explosion-proof machines. Retrofits or
modifications of the machine need the manufacturer's acceptance.
The explosion-proof machine is designed in the type of protection "c" constructive safety.
All work executed on the machine, influencing the explosion protection, e. g. repairs with mechanical machining,
require an approval of an authorized expert or have to be done by the manufacturer.
The internal structure must remain unmodified.
Unused machines and machine tools should be kept in a dry, closed room.
Keep them free from damaging influences such as damp, frost or large temperature fluctuations as well as
mechanical damage. Always store the machine in a way that important machine instructions, e. g. on stickers and
signs, are legible.
Dispose of machine and worn out/defective machine tools according the local/national regulations. Fully
disassemble the machine for the necessary disposal. Separate materials according to local environmental
specifications. Dispose of environmentally hazardous greasing, cooling or cleaning agents in order to avoid
environmental contamination.
32
DISASSEMBLY- RE-ASSEMBLY
STORAGE
DISPOSAL