Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
NOTICE – Gives recommendations and important hints for handling the product
IMPORTANT – Indicates application advice and other particularly useful information.
This symbol
has the
REMARK:
following
meaning:
In each case the symbol used does not replace the safety text. The text must always be read fully. In
some cases other symbols will be used with the signal words.
Operating pressure
For screws up to
Max. Torque (hard thread)
Air connection
Air consumption in average
Noise pressure level L
Noise power level L
ATEX Classification
Remark: Measurement acc. to DIN EN ISO 15744
(1)
Remark: Measurement acc. to DIN EN ISO 28927-
(2)
The performance specifications are guide values only, they depend basically on the application, the working
pressure and the accessories used.
The manufacturer machines are designed for industrial use only.
Only trained, skilled personnel are allowed to operate the machine. Impact wrenches are designed for the
tightening and loosening of screw joints in a range of performance defined by the manufacturer.
They have to be used in combination with appropriate:
•
Power socket wrenches,
•
extensions,
•
joints,
•
adapters.
It can be applied for:
•
Construction, pipeline construction, chemical industry/refineries and offshore, as well as for underwater use.
Any use deviating from the intended use as described is considered to be improper use.
•
Working without personal protection equipment.
•
Using the machine in an inadmissable area.
•
Using the machine for drilling, mixing or grinding.
TECHNICAL SPECIFICATION
Drive square
Torque
Weight
(1)
pA
WA
Vibration
(2)
2
Measurement uncertainty K: 3 dB (A)
Measurement uncertainty K: 1.5 m/s
INTENDED USE
IMPROPER USE
6 bar
1"
M30
880 Nm
1350 Nm
R 1/2" female
1.4 m³/min
5.7kg
96 dB (A)
107 dB (A)
4,5 m/s
2
II 2G c T6
2
21
Publicité
Table des Matières
