Description Of Terminals - Urmet 1039/74 Instructions D'installation

DESCRIPTION OF TERMINALS

}
SE+
Terminal pins of discharge electric lock with holding current for relay, if present
SE-
C Common lock relay contact
NC Normally closed lock relay contact
NO Normally open lock relay contact
}
V-
Auxiliary power terminals
V+
]
ILL Terminal pins for external lighting of name holder tags
]
PA Hall button terminals for operating lock relay
]
Door sensor terminals
SP
V5 Reference for external camera signal
V3 External camera signal
]
AD/ILA Ref. 1158/48 hearing aid audio device terminals
EXP Connector for button modules with expansion Ref. 1158/82 and Ref. 1158/84
LAN Ethernet connector for LAN RJ45
I2C DIGITAL
Connector for module with voice messages and led Ref. 1158/47
CONNECTOR
For further details, see the manual provided with the module with voice messages and leds.
Refer to the instructions contained in the system manual for wiring, maximum distances and confi guration
operations.
Use Urmet RJ45 connector kit for connections (product on sale until stocks last).
CONNECTION TO BUTTON MODULE WITH EXPANSION UNIT
Ref. 1158/82 and Ref. 1158/84
Use the following connections to connect the IP video door phone to button modules with expansion unit
Ref. 1158/82 and Ref.1158/84:
A
1158/84
B
C
1158/84
ILL
8
A
1158/84
B
1158/84
B
1158/84
B
1158/84
1158/82
B
1158/84
55 cm-long cable provided with the button module with
A
expansion unit Ref. 1158/82 and /84
20 cm-long cable provided with the button module with
B
expansion unit Ref. 1158/82 and /84
20 cm-long cable provided with the outdoor IP video
C
station
}
SE2
DS1039-043A