Installation; Description Of Terminals - Urmet 1719/1 Notice D'installation Et D'utilisation

INSTALLATION

• Fix the bracket to the wall using a box Mod. 503 and the screws provided or a Ø 60 mm box with
suitable screws.
• Program the dip-switches and connect the system wires to the terminal boards.
• Couple the video door phone to the bracket at the four hooks on the sides.
• Remove the protective fi lm from the display.
1
2 x M3.5 x 19 mm
provided
2
2

DESCRIPTION OF TERMINALS

Terminal
Terminal name
board
A
B
14
Description
CP Floor call
S+ Positive for supplementary ringer
S- Negative for supplementary ringer
C Common for Y1 and Y2 contacts
Y1 Contact 1 output (button
Y2 Contact 2 output (button
LINE IN Power input bus
LINE OUT Power output bus
Box
Mod. 503
2 x 2.9 x 13 mm
countersunk screws
1
)
3
)
Box
Ø 60 mm
DS1719-004