Specifications; Description Of Terminals; Jumpers Configuration (Jp1 And Jp2) - Urmet CXMODO 1722/87 Mode D'emploi

2.1. SPECIFICATIONS

1
1.
7" Touchscreen display
2.
Microphone
3.
Active mute indication red LED
4.
Sent Yokis control confirmation blue LED
5.
ON/OFF button

2.2. DESCRIPTION OF TERMINALS

K, Z:
Output for connecting
supplementary ringers (OP2)
POW:
Power voltage input from local
power supply unit
LINE IN:
Bus Line input
LINE OUT:
Bus Line output

2.3 JUMPERS CONFIGURATION (JP1 AND JP2)

The video door phone has 2 jumpers:
• JP1, used to power the "Slave" video door phone off the Bus Line or via a local power supply Ref.
1722/22 (see section "Connection block diagram");
Power from Bus line (default)
Power from local power supply
• JP2, used for line termination connection. The line termination must be activated on a video door phone
connected at the end of a line without a new section restarting from the LINE OUT terminals.
Terminal not inserted
Terminal insert (default)
12
2
6
3
4
5
K
Z
POW
JP1
JP2
9
JP1 JP2
8 7
6.
Speakers
7.
Configuration dip-switches
8.
Connection terminal strips
9.
Cable guide
10. Configuration jumpers
ON
1 2 3
10
8
LINE
IN
LINE
4
OUT
DS1722-082D