Safety Instructions - KAB SCIOX Mode D'emploi

Safety Instructions

Adjustments
• The driver's seats must be adjusted correctly before use of the vehicle for proper functioning and in order to avoid potential injury.
• The moving area of the driver's seat should be clear and free of any objects.
• Before operating the seat, all packaging material must be removed from the seat parts.
• Before the vehicle is driven, all seat adjustments must be correctly set.
• Adjustments to the seat must only be made when the vehicle is stationary.
HAZARD WARNING!
• The backrest frame should be supported by the driver's weight before the backrest recliner is to avoid the seat jerking forward and causing injury.
Installations
• Whilst installing or removing a seat, the instructions provided by the specifi c vehicle manufacturer must be followed.
• Holding onto the covers of the seat when lifting it is a potential danger to your safety. The covers could become loose or break causing personal injury.
• Before uninstalling the driver's seat, ensure all electrical connections between the seat and the vehicle operating system are disconnected. When replacing the
electrical connectors, make sure they are tightly installed.
• Seatbelts may only be fi tted or retrofi tted as approved by KAB Seating or a KAB Seating approved dealer.
• Before driving, seatbelts must be fastened. Aft er any accidents, the seatbelts must be replaced.
• After an accident, a specialist must check the seat, the seat belt and the seat mounting.
• The seat fasteners must be checked regularly for faults and to ensure they are tightly secured.
Care Instructions and guarantee
• The seat fasteners must be checked regularly for faults and to ensure they are tightly secured. The driver's seat is not waterproof; it must be protected against
contact with water or any liquids.
• The seat fasteners must be checked regularly for faults and to ensure they are tightly secured.The user should be aware that Potential injury can be caused by
improper seat installation or use.
• The seat fasteners must be checked regularly for faults and to ensure they are tightly secured.The improper installation or use may cause signifi cant injury
and will invalidate the guarantee for the seat and its mounted parts.
• The seat fasteners must be checked regularly for faults and to ensure they are tightly secured.KAB Seating does not guarantee or hold any liability for damage caused
by incorrect installation, use or seat repairs.
HAZARD WARNING!
• The seat fasteners must be checked regularly for faults and to ensure they are tightly secured. If your seat is no longer working properly, please contact a KAB Seating
approved dealer to have repairs carried out. Failure to do so could risk overall health and increase the potential for injury and accidents to occur.
• Loads must not be placed on seats except for the driver's weight during normal use.
• The seat fasteners must be checked regularly for faults and to ensure they are tightly secured. Do not remove the driver's body weight from the driver's seat when
the vehicle is being used. This will cause the vehicle to stop.
NOTE: IMPROPER INSTALLATION OR USE MAY CAUSE SIGNIFICANT INJURY AND WILL INVALIDATE THE GUARANTEE FOR THE SEAT AND ITS MOUNTED PARTS.
EN
Safety Instructions User Instructions
2