Product Usage - Edenwood MIDISOUND Consignes D'utilisation

B

Product usage

IMPORTANT!
• Before plugging in and switching on the speaker system, make sure that all
the controls are turned off or set to the minimum level.
Connections
Connect your device to the speaker via the cables and sockets detailed below:
Device Connection (cables not supplied)
Phone, iPad or There are two ways to connect to these
tablet devices:
CD/DVD player 1. Use a 3.5 mm plug to connect to the
MP3 player
Record player
TV
VCD 2. Use an RCA AUDIO cable to connect to
USB memory Connect a USB flash drive to play MP3
stick files.
Microphone/ Use a microphone/guitar cable with a
guitar 6.35 mm plug (not provided) to connect
a microphone.
NOTE:
• For optimal playback, ensure that only compatible MP3 audio files are saved
on the USB drive.
Connecting the speaker to an additional speaker
• Connect an RCA AUDIO cable to the AUDIO OUT L and R jacks on the speaker.
• Connect the other end of the RCA AUDIO cable to the AUDIO IN L and R jacks of the
additional speaker.
Pairing with a Bluetooth device
To connect the speaker to a Bluetooth device, you must first pair the speaker with the device.
1. Switch on the Bluetooth device (such as your phone or tablet):
• Go to your device's settings.
• Enable the Bluetooth function.
LINE IN jack. The other end of the
cable must be connected to your
audio device.
the AUDIO IN L and R jacks.
22
Speaker socket/slot
AUDIO IN L and R
USB A (PLAYBACK)
MIC IN/GUITAR IN
EN
LINE IN