Edenwood MIDISOUND Consignes D'utilisation page 28

B
Product usage
WARNING!
• Never hold the microphone too close to the speaker, as this may cause feedback.
Guitar
An electric guitar can be connected to the speaker to play your favourite songs.
• Connect the cable (not supplied).
• Turn the GUITAR VOL knob to adjust the guitar volume.
• When you have finished using the guitar, unplug the cable from the speaker.
Changing the light effects
• Repeatedly press the LIGHT button to select 1 of the 7 different light effects (LED1 to
LED7) or turn off the lights (OFF will be displayed on the screen).
• For the LED1, LED2 and LED3 light effect modes, you can turn the LIGHT control knob
to select your favourite colour: COL1 to COL7, PURPLE, BLUE, WHITE, GREEN, RED,
TURQUOISE and YELLOW.
Charging USB devices
• Connect the USB plug of a USB device (such as your mobile phone) to the USB B CHARGING
socket (5 V DC, 2.1 A).
NOTE: The USB B CHARGING socket cannot be used to play USB files. It has only
been designed to charge devices.
Resetting the unit
If for some reason, the speaker is not working properly, it can be reset:
1. Repeatedly press the SOURCE button to select LINE IN mode.
2. Turn the MASTER VOLUME knob to V00.
3. Press and hold the
button. 8888 will be displayed to confirm that the unit has been successfully reset.
button to display the software version number. Then press the
26 EN