La Pavoni KUBE MILL Mode D'emploi page 9

KUBE MILL
2
3
1
1 - CHARACTERISTICS AND TECHNICAL DATA
The KUBE MILL coffee grinder has the following features:
• Fully stainless steel construction.
• The grinding is done at once by the pressure of the filterholder.
• On a micro-switch.
• Conical grinding wheels in stainless steel.
2 - SAFETY RECOMMENDATIONS AND RULES
Follow these rules carefully:
– The KUBE MILL coffee grinder should only be used for the purpose for which it was made.
– Improper use of the machine can cause damage to persons and property for which the manufacturer cannot
be held responsible.
– Always contact a qualified service center or the manufacturer for operations other than those described in the
instruction book and for all types of repairs.
– Make sure the mains voltage is the same as the data on the rating plate.
– Make sure the electric power system is compatible with the data on the rating plate.
– The coffee grinder should be well and safety grounded. Have the system checked if you have any doubts.
– Make sure the power system is equipped with a safety cutoff that works properly and that the cross section of
the cables is sufficient for the power absorbed.
– For any type of malfunction or problems not specified here, unplug the machine and do not attempt to check
PARTS OF THE GRINDER
1 Main switch
2 Coffee bean container
3 Micro-switch
4 Grinding regulation knob
Technical Data KUBE MILL :
4
Depth:
Width:
Height:
Weight:
Coffee grinder capacity:
Power:
Voltage:
9
English
185 mm
125 mm
320 mm
3 kg
300 g
100 W
230 V - 50 Hz
115 V - 60 Hz