LaCie Little Disk Guide D'installation Rapide page 4

Setup Steps
1. Remove the cap and pull out the USB 2.0 cable.
2. Connect the USB 2.0 cable to your computer.
3. The Little Disk will power on and mount on your
desktop (Mac) or in My Computer (Windows) in
a few seconds.
Optional: Some computers limit USB bus power. If your drive does not power
on after connecting the USB cable, you may need to connect the USB power
sharing cable to power your drive. Unplug the USB cable from the drive, con-
nect the USB power sharing cable to your computer and to the drive and recon-
nect the USB cable.
NOTE: User Manual and utilities are pre-loaded on the Little Disk.
The LaCie Little Disk is pre-formatted as a FAT 32 volume, ready for immediate cross-platform use with Mac
and Windows. Please refer to the User Manual pre-loaded on the drive for information about formatting
your LaCie Little Disk.
For the latest documentation and software updates, please visit www.lacie.com and click on "Support
and Downloads."
USB extension cable
included (optional)