Cleaning And Maintenance - Fagor Eclipse Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

have to press and hold the button for a couple of seconds until you hear a beep and
the red light turns off.
Using the Eclipse Induction Cooktop with a Fagor Stovetop Pressure
Cooker:
1. Follow steps 1-4 of the "Using Your Induction Cooktop" section (page 10).
2. Select the BROWN Quick Launch function.
3. Once the pressure cooker reaches pressure (the pressure indicator has risen and
steam comes out from the top of the pressure valve), lower the temperature by pressing
the BOIL Quick Launch function and cook for the time specified in your recipe.

Cleaning and Maintenance

• Unplug the induction cooktop prior to cleaning and wait until the surface cools
down. Do not use any abrasive cleaning products on your induction cooktop and
make sure that water does not drip or leak into the induction cooktop.
• Never immerse the induction cooktop, its cables or the plug into water or other
liquids.
• Wipe off the glass cooktop with a damp cloth or use a mild, non-abrasive soap
solution.
• Wipe off the casing and the operating panel with a soft cloth or a mild detergent.
• Do not use any oil based cleaning products to avoid damaging the plastic parts
or casing.
• In order to keep your cooktop looking new, make sure that the bottom of your
cookware does not scrape the glass surface, although a scratched surface will
not impair the use of the induction cooktop.
• Make sure to properly clean the unit before storing it in a cool, dry place.
13

Publicité

Table des Matières
loading

Table des Matières