Hikmicro LYNX Serie Guide De Démarrage Rapide page 10

Power Supply
● Input voltage should meet the Limited Power Source (5 VDC, 2 A)
according to the IEC62368-1 standard. Please refer to technical
specifications for detailed information.
● Make sure the plug is properly connected to the power socket.
● DO NOT connect multiple devices to one power adapter, to avoid
over-heating or fire hazards caused by overload.
● Use the power adapter provided by qualified manufacturer. Refer to
the product specification for detailed power requirements.
Battery
● The built-in battery cannot be dismantled. Please contact the
manufacture for repair if necessary.
● For long-term storage of the battery, make sure it is fully charged every
half year to ensure the battery quality. Otherwise, damage may occur.
● Use the battery provided by qualified manufacturer. Refer to the
product specification for detailed battery requirements.
● CAUTION: Risk of explosion if the battery is replaced by an incorrect
type.
● Improper replacement of the battery with an incorrect type may defeat
a safeguard (for example, in the case of some lithium battery types).
● Do not dispose of the battery into fire or a hot oven, or mechanically
crush or cut the battery, which may result in an explosion.
● Do not leave the battery in an extremely high temperature surrounding
environment, which may result in an explosion or the leakage of
flammable liquid or gas.
● Do not subject the battery to extremely low air pressure, which may
result in an explosion or the leakage of flammable liquid or gas.
● Dispose of used batteries according to the instructions.
Maintenance
● If the product does not work properly, please contact your dealer or
the nearest service center. We shall not assume any responsibility for
problems caused by unauthorized repair or maintenance.
8