Hilti ST 2500 Mode D'emploi page 18

▶ Wear protective gloves also when changing the accessory tool. Touching the accessory tool presents a
risk of injury (cuts or burns).
▶ Wear eye protection. Flying fragments present a risk of injury to the body and eyes.
▶ Before starting work, check the hazard class of the dust that will be produced when working. Use
an industrial vacuum cleaner with an officially approved protection class in compliance with the locally
applicable dust protection regulations. Dust from materials such as lead-based paint, certain types of
wood and concrete/masonry/stone containing quartz, minerals or metal may be harmful to health.
▶ Make sure that the working area is well ventilated and, where necessary, wear a respirator appropriate
for the type of dust generated. Contact with or inhalation of dust may cause allergic reactions and/or
respiratory or other diseases to the operator or bystanders. Certain kinds of dust, such as oak and beech
dust, are classified as carcinogenic, especially in conjunction with additives for treating wood (chromate,
wood preservative). Materials containing asbestos may only be handled by specialists.
▶ Take breaks between working and do physical exercises to improve the blood circulation in your fingers.
Exposure to vibration during long periods of work can lead to disorders of the blood vessels and nervous
system in the fingers, hands and wrists.
Electrical safety
▶ Before starting work, check the working area for concealed electric cables or gas and water pipes. If
you damage an electric cable accidentally, external metal parts of the power tool may become live and
present a risk of electric shock.
Careful handling and use of power tools
▶ Switch the power tool off immediately if the accessory tool jams. The power tool may go off course and
veer to the side.
▶ Wait until the power tool has come to a complete stop before setting it down.
3 Description
3.1 Product overview
3.2 Intended use
The ST 2500 is a hand-held electric screwdriver for fastening profile metal sheets, metal sheets and sandwich
panels in metal construction.
3.3 Main applications
Application
Fastening insulation material to trapezoidal steel
sheet
12 English
Printed: 24.07.2018 | Doc-Nr: PUB / 5070745 / 000 / 03
1
Chuck
@
Protective sleeve
;
Click connection between depth gauge and
=
power tool
Control switch lock
%
Supply cord
&
Control switch
(
Forward / reverse switch
)
Depth gauge adjustment
+
Screw type
Insulating screws with
drill point
Type S-ID, with type
S-IS point
Diameter Product
in mm
•/• ST 2500
378507
*378507*