Features - Ryobi RHS01 Manuel D'utilisation

KNOW YOUR HOBBY STATION
See Figure 1, page 15.
The safe use of this product requires an understanding of the
information on the product and in this operator's manual as
well as a knowledge of the project you are attempting.Before
use of this product, familiarize yourself with all operating
features and safety rules.
BEVEL LOCK KNOB
The bevel lock knob securely locks rotary tools at desired
bevel angles.
NOTE: The tool carrier bevels to the left only. There are posi-
tive stops at 0°, 15°, 30°, 45°, 60°, 75°, and 90°.
BEVEL SCALE
The bevel scale indicates the degree the rotary tool is tilted.
CORD MANAGEMENT
Secure rotary tool power cord in the cord retainer and cord
holder to keep it away from accessories and workpieces.
COUPLER
The coupler is used to secure a rotary tool to the hobby station.

FEATURES

DETENT OVERRIDE
The detent bypass knob allows the tool carrier to move freely
to your desired angle.
DEPTH STOP
The adjustable locking depth stop permits accurate depth
measurement and repetitive drilling.
FENCE
The fence can be installed in multiple positions and can be
used to secure your workpiece during drilling and routing
operations.
HEIGHT AND ROTATION LOCK LEVER
Loosen the height and rotation lock lever to move the tool
carrier up, down, and around the column.
PLUNGE LEVER
The plunge lever raises and lowers the rotary tool during
drilling operations.
TOOL HANGER
The tool hanger provides a convenient place to hang the
rotary tool while using a flex shaft.
4 - English