Publicité
Les langues disponibles
Les langues disponibles
Electrical connection
The appliance may only be connected to al-
ternating current. The voltage must corre-
spond with the type plate on the appliance.
Risk of electric shock
Never touch the mains plug and the socket
with wet hands.
Always hold the plug rather than the cable
when disconnecting the power cord.
Check the power cord with mains plug for
damage before every use. If the power cord
is damaged, please arrange immediately
for the exchange by an authorised custom-
er service or a skilled electrician.
To avoid accidents due to electrical faults
we recommend the use of sockets with a
line-side current-limiting circuit breaker
(max. 30 mA nominal tripping current).
Caution
Certain materials may produce explosive
vapours or mixtures when agitated by the
suction air!
Never vacuum up the following materials:
Explosive or combustible gases, liquids
–
and dust particles (reactive dust particles)
Reactive metal dust particles (such as
–
aluminium, magnesium, zinc) in combi-
nation with highly alkaline or acidic de-
tergents
Undiluted, strong acids and alkalies
–
Organic solvents (such as petrol, paint
–
thinners, acetone, heating oil).
In addition, these substances may cause
the appliance materials to corrode.
Description of the Appliance
Illustrations on fold-out
pages!
When unpacking the product, make sure
that no accessories are missing and that
none of the package contents have been
damaged. If you detect any transport dam-
ages please contact your dealer.
1
Suction hose connection
To connect the suction hose during vacu-
uming.
Note: In order to disconnect it, push down
with your thumb and pull the suction hose out.
2
Blowing connection
Connect the suction hose to the blower
connection, this will activate the blower
function.
3
Carrying handle
To carry the appliance or to remove the ap-
pliance head after unlocking.
4
Filter flap release button
5
Accessory compartment, hook
This accessory compartment allows the
storage of the suction hose, suction noz-
zles and the mains cable.
6
Rotary switch with two
Eco power levels
Position 0: Appliance is switched off
Position 1 eco: Suction or blowing (re-
duced suction power).
Position 2 eco: Suction or blowing
(max. suction power).
7
Parking position
To rest the floor nozzle during work inter-
ruptions.
8
Accessory storage container
This accessory compartment allows the
storage of the suction pipes or other acces-
sories.
9
Container closure
Pull out to open, push in to lock.
10
Wheels
11
Swivel casters
12
Flat fold filter with frame
(already installed in the appliance)
Caution
Filters and their frames must always be in-
serted during operation.
– 2
EN
11
Publicité
