Battery Usage; Accessories - Hoover H-FREE 300 HYDRO Manuel D'utilisation

FRONT WIPER BLADE FIXING
To obtain the best crevice and carpet performance, it is recommended to fix the front wiper blades vertical and don't turn
forward and backward during using:
1. Detach the Hybrid Care roller release flap and remove it. [5a]
2. Push down the nozzle front wiper fixing button. [5b]
3. Re-fit the Hybrid Care roller in position. [5c]

BATTERy USAGE

When the battery is discharging in normal use, the battery pack LED is white. When the Battery capacity is lower than 5%,
the WHITE LED light will begin to flash.
When this happens, you should stop cleaning and immediately recharge your battery. [2]
When charging the product, the switch on/off must be OFF.
It is also possible to charge the battery pack when released from the product.
The charging time of the product is 2.5 Hrs. When the battery fully charged the LED light on the battery will illuminate
white. [6]
NOTE: It is normal for the charger to become warm to touch when charging. Use only the charger supplied with your
product.
SAFETy PROTECTION SySTEM
To ensure the reliability of the product is not affected if used under arduous conditions, the product features two integrated
safety protection systems.
NOTE: The Safety protection system will action in two conditions:
1. If there are obstructions in the air inlet or in the tube, the cleaner will be protected and turn OFF, and the LED light on
the battery pack unit turns to red. If this happens simply check if there are any obstructions in the tube or in the air inlet of
the handheld. Remove it and switch ON again.
2. If the agitator has a blockage or is locked, once actioned, the agitator will stop rotating and the WHITE LED light on the
nozzle will turn to RED. [21] If this happens, simply turn off your product and clear the agitator obstruction. To resume
cleaning, press the switch on/off button and the product will start working again.

ACCESSORIES*

2IN1 CREVICE AND DUSTING TOOL*, 2IN1 LARGE DUSTING AND FURNITURE TOOL*, LONG FLExIBLE CREVICE
TOOL*, MULTI-FUNCTION Up TO TOp TOOL* and MINI-TURBO NOZZLE*
The above accessories can be fitted directly into the main body unit or the tube. [9]
NOTE: To remove the nozzle or main body unit from the tube, press the respective release button and pull apart.
RADIATOR TOOL* / DEEp CLEANING BRUSH*
The accessory adaptor* must be fitted when using these 2 accessories. [9]
NOTE: The mini-turbo nozzle is ideal for deep cleaning textile surfaces (i.e. sofas) and pet hair removal. Move it steadily
backwards and forwards. After using, please remove hair / threads collected on the brush with scissors if necessary.
The long flexible crevice tool is ideal for cleaning in hard to reach areas, underneath furniture and in your car.
The radiator tool is ideal for cleaning inside and around cabinets, radiators and couches.
The deep cleaning brush is useful to clean in tight spaces without scratching surfaces, and inside your car.
The multi-function tool is designed to easily clean delicate surfaces without scratching and all area's that are hard to access
or reach. The multi-function tool is made up three key parts:
1. Crevice tool this is ideal for accessing tight spaces.
2. Dusting brush is ideal for cleaning surfaces without damaging or scratching.
3. Furniture Nozzle is ideal for cleaning surfaces like sofa.
ACCESSORy BAG*
Accessories can be stored in the accessory bag.
WALL MOUNT*
Hang the wall mount to the wall, using the two screws included in the product to hang product [10]
5
GB