Vfo Reset - Kenwood TM-281A Mode D'emploi

Full Reset Method 2:
1 Press [F], [MENU] and turn the Tuning control to
select Menu No. 99 (RESET).
2 Press [MENU] and turn the Tuning control to select
"FULL".
3 Press [MENU].
• "SURE ?" appears.
• Press any key other than [MENU] to cancel.
4 Press [MENU] to reset the transceiver.
• "WAIT" appears momentarily.
VFO R
ESET
This resets the transceiver parameters excluding the
DTMF Memory, the Memory channel contents, and the
Call channel contents. There are two methods available
for resetting the transceiver.
Note: Menu No. 7 (P.VFO) and Menu No. 10 (OFFSET) return to
the factory default values.
14
68
VFO Reset Method 1:
1 With the transceiver power OFF, press [VFO]+[
(Power).
• The VFO reset confirmation message appears.
2 Press [VFO].
• "SURE ?" appears.
• Press any key other than [VFO] to cancel.
3 Press [VFO] again to reset the transceiver.
• "WAIT" appears momentarily.
VFO Reset Method 2:
1 Press [F], [MENU] and turn the Tuning control to
select Menu No. 99 (RESET).
2 Press [MENU] and turn the Tuning control to select
"VFO".
3 Press [MENU].
• "SURE ?" appears.
• Press any key other than [MENU] to cancel.
4 Press [MENU] to reset the transceiver.
]