WMF KITCHENminis XXL Mode D'emploi page 12

▪ Do not cover the bread slot during toasting. Do not lay any bread slices or rolls on the casing, as
this causes the device to overheat.
▪ No liability is assumed for any damages in cases of misuse, improper operation or unprofessional
repairs. Claims under warranty are likewise excluded in such cases.
Use
The WMF KITCHENminis® long-slot toaster is a space-saving toaster for XXL toast slices (up to a size of
11x11cm), long slices of bread, bagels and rolls.
This toaster is suitable for standard slices of bread, XXL slices of bread (up to 11x11cm in size), plaited
yeast buns and similar bakery products with a maximum thickness of 2.8 cm.
Only use bakery products without fillings and toppings such as butter and jam.
Start-up
The section of the power cable not in use can be wound up and stored on the base of the appliance.
Connect the power plug to a shockproof socket.
Prior to first use, carry out at least three toasting cycles without bread and at maximum power,
to remove the surface protection on the heating elements. The smell released during this process
is harmless, but you should ensure good ventilation nevertheless. Always allow the appliance to
cool down a little before switching it on.
Warning, risk of burns: Accessible surfaces can become very hot. They remain hot for a while even
after toasting is finished. Insert the slice of bread into the bread slot. The slices should not be thicker
than 2.8 cm so that they do not jam. Place small slices upright in the bread slot so that it is easier to
take them out with the tongs (9) after toasting.
Insert the bread slice into the bread slot. To avoid the slice becoming jammed, it should not be thicker
than 2.8 cm. Place small slices upright in the bread slot so that it is easier to take them out after
toasting.
First set the slider (6) for the browning level to the middle setting. Press the lift button (1) down.
The device switches on and the lift button (1) moves into the holding position for the duration of
the toasting process. Once toasting is finished, the lift button (1) returns to the initial position, the
appliance automatically switches off and the finished toast or slice of bread is raised for removal from
the bread slot.
Notes on the browning level
If the toast is too light, select a higher control setting. If the toast is too dark, place the control (6) on
a lower setting. The higher the setting, the darker the browning is. With the control (6), you can brown
toast entirely to your taste from just slightly (min setting
The toasting result may vary at the same setting depending on the type, size, moisture and thickness
of the bread slices. Therefore, select a lower setting when toasting less moist bread and smaller slices.
12
) to strong, dark brown (max setting ).