Raider RD-GBC10 Mode D'emploi page 26

26 www.raider.bg
EN
Congratulations for the purchase of gasoline brush cutter from the successfully
growing brands - RAIDER. As being properly installed and operated, RAIDER are safe and
reliable machines, and work with them will bring a real pleasure. For your convenience has
been built an excellent service network of 45 service stations across the country.
Before using this gasoline brush cutter please carefully acquaint to these "instructions
for use".
In interest of your safety and to ensure proper use, read these instructions carefully,
including the recommendations and warnings in them. To avoid unnecessary errors and
accidents, it is important that these instructions must remain available for future reference
to all who will use the machine. If you sell it to a new owner "Instructions for Use" must be
submitted along with it, so that new owner can meet with the relevant safety measures and
operating instructions.
EUROMASTER Import Export Ltd. is an authorized representative of the manufacturer and
owner of the trademark RAIDER.
Adress: Sofia City 1231, Bulgaria "Lomsko shausse" Blvd. 246, tel 02 934 33 33, 934 10 10,
www.raider.bg; www.euromasterbg.com; e-mail: info@euromasterbg.com.
Since 2006 the company introduced the system of quality management ISO 9001:2008
with scope of certification: Trade, import, export and servicing of hobby and professional
electrical, mechanical and pneumatic tools and general hardware. The certificate was issued
by Moody International Certification Ltd, England.
Components (see page 2 for reference picture)
1. Engine.
2. Fuel tank.
3. Cap of the gasoline tank.
4. Clutch cover.
5. Cowl shaft.
6. Cutting attachment guard.
7. Blade.
8. Throttle control.
9. Throttle lockout.
10. Hold button throttle lever (for ease of continuous operation).
11. The cord of gas.
12. Handle of the manual starter.
13. Ignition switch
14. Gas limit switch
15. Air filter case
16. Spark plug connector
Original instructions' manual
Dear Customer,