Publicité
Les langues disponibles
Les langues disponibles
Step 8:
Continued
Figure 11
ASSEMBLING AND ATTACHING THE MAST-R-FENCE III GUARD
Step 9:
Attaching the guard to the fence
Figure 12
Figure 13
e.
Ensure the right and left hand track scale (part #17 & #35) are
on the proper sides. See Figure 11.
f.
With the
on the front of the left and right hand scales. See Figure 11.
g.
Slide the scale to align the "0" on the scale with the front edge
35
35
of the fence. See Figure 11.
16
16
h.
Tighten the set screw. Repeat this for the other scale on the
opposite side of the fence. The Mast-R-Fence III should now
be centred on your router table.
Assembling the guard mount:
8
8
a.
Slide the
the centre hole in the guard mount. See figure 12. Thread the
guard mount clamping knob (part #8) onto the hex head screw.
DO NOT tighten all the way. Leave loose enough to slide into
the T-slot in the upper fence (part #11).
9
9
10
10
Attaching the guard mount to the fence:
9
9
b.
Slide the guard mount (part #9) into the T-slot by aligning the
⁄
"-20 X 1-
1
4
fence (part #11).
10
10
11
11
11
⁄
" hex key provided, loosen the set screws (part #16)
5
64
⁄
⁄
"-20 X 1-
" hex head screw (part #10) up through
1
1
4
2
⁄
" hex head screw (part #10) in the top of the upper
1
2
Publicité
