Parts Included; Optional Accessories - GE JV535 Manuel Du Propriétaire Et Instructions D'installation

• If the unit is damaged in shipment, return the unit to the
store in which it was bought for repair or replacement.
• If the unit is damaged by the customer, repair or
replacement is the responsibility of the customer.
• If the unit is damaged by the installer (if other than
the customer), repair or replacement must be made
by arrangement between customer and installer.
MOUNTING SPACE
66" or
more from
the floor to
the top of
the hood
• This range hood is for installation over ranges up to 36"
wide.
• If you are going to vent your range hood to the outside,
preparation.
Installation Instructions
Bottom edge
of cabinet
needs
to be 30" or
more from
the cooking
surface
30"
min.
TOOLS YOU WILL NEED
Flat blade and Phillips
screwdrivers
Saw (saber or
keyhole)
1/4" pivoting Pliers
Flashlight Caulking

PARTS INCLUDED

PART
Metal Grease Filters
Mounting Screws
(for 3
1 4
PARTS YOU MAY NEED

OPTIONAL ACCESSORIES

These kits can be ordered from your GE supplier.
order Kit no. JXHC1.
For 30"
For 36"
9
Pencil
Electric drill Metal snips
(in some
applications)
Tape measure Wire stripper
Level
1/4" Nutdriver
QUANTITY
" " rect. venting)
" Round
" and 36" models,
Duct tape
2
4