Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Maintenance
•
Check all visible parts and controls for signs of damage at regular intervals and make sure that they all
function correctly.
•
Do not operate the product if signs of damage are found or if parts malfunction. Have it repaired
immediately by Hilti Service.
•
After cleaning and maintenance, fit all guards or protective devices and check that they function correctly.
To help ensure safe and reliable operation, use only genuine Hilti spare parts and consumables. Spare
parts, consumables and accessories approved by Hilti for use with the product can be found at your
local Hilti Center or online at: www.hilti.com
Refilling with oil
▶ Frequent removal and reconnection of the pressure gage causes the oil level in the reservoir to drop. In
extreme cases this can result in the volume of oil dropping below the level necessary for the pressure
gage to show a correct reading.
Technical data
X
▶ When this happens, it is advisable to bring the tester to a Hilti repair workshop for checking and refilling
with oil.
7
Transport and storage
•
Store the product in a dry place, where it cannot be accessed by children or unauthorized persons.
•
Check the product for damage before use after long periods of transport or storage.
8
Disposal
Most of the materials from which Hilti tools and appliances are manufactured can be recycled. The
materials must be correctly separated before they can be recycled. In many countries, your old tools,
machines or appliances can be returned to Hilti for recycling. Ask Hilti Service or your Hilti representative
for further information.
▶ Do not dispose of power tools, electronic equipment or batteries as household waste!
9
Manufacturer's warranty
▶ Please contact your local Hilti representative if you have questions about the warranty conditions.
10
Further information
For more information on operation,
qr.hilti.com/manual?id=286175
This link is also to be found at the end of the documentation, in the form of a QR code.
Mode d'emploi original
1
Indications relatives au mode d'emploi
1.1
À propos de ce mode d'emploi
•
Avant de mettre l'appareil en marche, lire impérativement ce mode d'emploi.
préalablement requise pour assurer la sécurité du travail et un maniement sans perturbations.
•
Bien respecter les consignes de sécurité et les avertissements du présent mode d'emploi ainsi que celles
figurant sur le produit.
•
Toujours conserver le mode d'emploi à proximité du produit et uniquement transmettre le produit à des
tiers accompagné de ce mode d'emploi.
14
Français
> 6 mm ... < 15 mm
technology,
environment and recycling,
follow this link:
C'est la condition
286175
*286175*
Publicité
Table des Matières
