Description; Purpose; Overview; Package Contents - GreenWorks SH24B00 Manuel D'opérateur

EN
1

DESCRIPTION

1.1

PURPOSE

The machine is intended for light trimming of shrubs and
lawn edges in domestics use.
1.2

OVERVIEW

3
Battery compartment
1
On/Off switch
2
Blade assembly
3
Lock-off button for on/off switch
4
Plug connector for telescopic shaft
5
Socket for charge plug
6
Blade assembly release button
7
Battery (not included)
8
Battery release button
9
Plug door
10
Socket release button
11
1.3

PACKAGE CONTENTS

Main machine
1
Grass shear blade assembly
2
Hedge trimmer blade assembly
3
Manual
4
2 GENERAL POWER TOOL
SAFETY WARNINGS
Read all safety warnings and all instructions. Failure to
follow the warnings and instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your battery-
operated (cordless) power tool.
4
2
6
5
WARNING
English
2.1

WORK AREA SAFETY

• Keep work area clean and well lit. Cluttered or dark areas
invite accidents.
• Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or
dust. Power tools create sparks which may ignite the dust
or fumes.
• Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
1
2.2

ELECTRICAL SAFETY

• Power tool plugs must match the outlet. Ensure that the
Power Tool plug matches the outlet before use. Do not
use this product with any adapters or modified plugs.
Unmodified plugs and matching outlets will reduce risk
of electric shock.
• Avoid body contact with grounded surfaces, such as
pipes, radiators, ranges and refrigerators. There is an
increased risk of electric shock if your body is grounded.
• Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
• Never use the cord for carrying, pulling or unplugging the
power tool. Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase the
risk of electric shock.
• When operating a power tool outdoors, use an extension
cord suitable for outdoor use. Use of a cord suitable for
outdoor use reduces the risk of electric shock.
2.3

PERSONAL SAFETY

• Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a power
tool while you are tired or under the influence of drugs,
alcohol or medication. A moment of inattention while
operating power tools may result in serious personal
injury.
• Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask, non-
skid safety shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
• Prevent unintentional starting. Ensure the switch is in the
off-position before connecting the tool to a power source
and/or battery pack before picking up or carrying the tool.
Carrying power tools with your finger on the switch or
energising power tools that have the switch on invites
accidents.
• Remove any adjusting key or wrench before turning the
power tool on. A wrench or a key left attached to a
rotating part of the power tool may result in personal
injury.
• Keep proper footing and balance at all times. This enables
better control of the power tool in unexpected situations.
• Dress appropriately, do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves away from
4