Proposition 65; Installation; Unpack The Machine; Install The Blade Assembly - GreenWorks SH24B00 Manuel D'opérateur

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

6

PROPOSITION 65

WARNING
This product contains a chemical known to the state of
California to cause cancer, birth defects or other
reproductive harm. Some dust created by power sanding,
sawing, grinding, drilling, and other construction activities
contains chemicals known to cause cancer, birth defects or
other reproductive harm. Some examples of these chemicals
are:
Lead from lead-based paints;
Crystalline silica from bricks and cement and other
masonry products;
Arsenic and chromium from chemically treated lumber.
Your risk of exposure to these chemicals varies depending
on how often you do this type of work. To reduce your
exposure to these chemicals, work in a well-ventilated area,
and work with approved safety equipment, such as dust
masks that are specially designed to filter out microscopic
particles.
Save these instructions.
7

INSTALLATION

7.1

UNPACK THE MACHINE

WARNING
Make sure that you correctly assemble the machine before
use.
WARNING
If parts of the machine are damaged, do not use the
machine.
If you do not have all the parts, do not operate the
machine.
If parts are damaged or missing, contact the service
center.
1. Open the package.
2. Read the documentation provided in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and packing material in compliance with
local regulations.
English
7.2

INSTALL THE BLADE ASSEMBLY

1. Locate the end of blade assembly (3) under the retaining
rib in the rear corner of the housing, press down the
whole blade assembly (3) until aligning the holes in the
blade onto the pins.
7.3

REMOVE THE BLADE ASSEMBLY

3
7
1. Press the blade assembly release button (7).
2. Lift the blade assembly (3) away from the housing.
7.4

INSTALL THE BATTERY

If the battery pack or charger is damaged, replace the
battery pack or the charger.
Stop the machine and wait until the engine stops before
you install or remove the battery pack.
Read, know, and do the instructions in the battery and
charger manual.
7
3
WARNING
EN
8

Publicité

Table des Matières
loading

Table des Matières