Hoover MULTI SENSOR Manuel D'utilisation page 7

75+0) ;174 *274+(+'4
Plug in the Product [Fig. 2]:
Pull out the power cord and plug into a power supply.
All lights on the Control Panel / Display will fully illuminate for approximately 1 second to indicate a
succesful plug in.
The POWER button will be dimly lit and the CO sensor light will be ON to indicate that the Multi Sensor
Monitoring System has started working to monitor the indoor Carbon Monoxide level.
Switching on the Product [Fig. 3]:
To switch on your product, press the POWER button on the display.
The Air Quality LED Ring will illuminate through all colours in sequence whilst the sensors are analysing
the realtime air condition. After a few seconds, the Air Quality LED ring will select the appropriate colour
for the air quality at that time.
;QWT *2WTK GT RTQFWEV YKNN KOOGFKCVGN[ GPVGT #761 /1&' CPF DGIKP VQ RWTKH[ VJG KPFQQT CKT
The AUTO MODE button, LIGHTING button and on the Display will illuminate.
The following functions are available via the Display buttons:
Press the Wi-Fi button to turn on/off remote access.
2TGUU VJG #761 /#: QT 5.''2 DWVVQPU VQ UGNGEV C RWTKH[KPI OQFG
Press the LIGHT CONTROL button to set the brightness of the display lights.
Press the CHILD LOCK button to inactivate all the buttons on the Control Panel / Display.
2TGUU VJG 219'4 DWVVQP VQ UYKVEJ QHH VJG CKT RWTK GT
Pairing to Wi-Fi:
+P QTFGT VQ CEEGUU CNN VJG *2WTK GTU HWPEVKQPU HTQO CP[YJGTG KV KU UWIIGUVGF VQ FQYPNQCF VJG J1P #RR
;QW YKNN DG CDNG VQ EQPVTQN [QWT RTQFWEV KP VJG OQUV GH EKGPV YC[
Instructions:
1. Download the hOn application from the App Store or Google Play. [Fig. 4]
2. Open the APP, create an account with your e-mail and a password.
3. %QP TO NQIKP
4. Ensure your mobile device is connected to Wi-Fi.
5. Log into the hOn app.
6. Press and hold the Wi-Fi button on the display for 5 seconds, there will an audible beep and the
9K(K DWVVQP YKNN UVCTV CUJKPI VQ KPFKECVG KV KU YCKVKPI HQT C EQPPGEVKQP [Fig. 5]
7. Follow the in app instructions to connect your mobile device to your product.
8. When successfully paired, the Wi-Fi button on the product will remain illuminated.
9. 6Q TGUGV VJG 9K(K RTGUU
Wireless Parameters for Pairing
Technology
Standard
(TGSWGPE[ $CPF U /*\
/CZKOWO 2QYGT O9
MODE Functions:
6JGTG CTG  CXCKNCDNG CKT RWTKH[KPI OQFGU XKC VJG FKURNC[ #761 /1&' /#: /1&'
Auto mode is the default setting for your product when switched on, all modes can be selected manually
by pressing the related button on the display.
21..'0 #..'4); OQFG ECP DG CEVKXCVGF XKC VJG J1P CRR
AUTO MODE [Fig. 6]:
6JKU KU VJG FGHCWNV OQFG QH [QWT *2WTK GT RTQFWEV YJGP TUV UYKVEJGF QP +P #WVQ /QFG VJG *2WTK GT
automatically adapts its purifying performance to the real-time monitored indoor air quality level.
This is the recommended setting for your product.
In AUTO mode, after 30 minutes of excellent air quality, your product will enter an ECO mode by
pausing the purifying function, the Multi Sensor Monitoring System will continue to analyse the indoor air
and automatically switch on the purifying function when required.
MAX MODE [Fig. 7]:
2TGUU VJG /#: OQFG DWVVQP QP VJG FKURNC[ VQ CEVKXCVG CKT RWTKH[KPI CV OCZKOWO RQYGT UGVVKPI 6Q GZKV
/#: OQFG UKORN[ UGNGEV #761 OQFG QT 5.''2 OQFG
JQNF VJG 9K(K DWVVQP HQT  5GEU
Wi-Fi
IEE 802.11 b/g/n $NWGVQQVJ X $4'&4 $.'
 `   ` 
100
Bluetooth
10
5.''2 /1&'
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
GB
7