Philips Aqua Plus 8000 Serie Mode D'emploi page 10

English
10
Using the appliance with Eco power mode (Setting 1)
* Based on use of the appliance with the Aqua Nozzle
User interface signals and their meaning
Signal Description of signal
The signal '00' and the battery icon flash on the
display.
A number between '00'and '90' flashes on the
display.
The number '100' lights up on the display.
The battery symbol lights up on the display.
A number between '00' and '10' together with the
battery icon flash on the display.
The display shows a flashing square and the orange
filter cleaning icon also flashes.
Error code 'E1' lights up on the display.
Note: When the appliance is charging on the charging
station, the E1 error code may look like the number
13.
Error code 'E4' lights up on the display.
Note: When the appliance is charging on the charging
station, the E4 error code may look like the
designation h3
Error code 'E6' lights up on the display.
Note: When the appliance is charging on the charging
station, the E6 error code may look like the number
93.
Up to 80 minutes*
Meaning of signal
The battery is empty.
The appliance is charging.
After a full charging cycle, this signal
appears to show that the rechargeable
battery is fully charged.
The appliance is in standby mode with
a fully charged battery.
The rechargeable battery of the
appliance is low.
It indicates the recommended time to
check and clean the filter (Fig. 8) to
ensure the best performance of the
appliance.
This indicates that the appliance has
been stored or charged at a
temperature below 5 °C. Move the
appliance to a warmer room. Do not
store or charge the appliance at a
temperature below 5 °C or above 40 °C.
The roller brush in the 360 ° suction
nozzle or in the mini Turbo brush has
become blocked and cannot turn
freely. Switch off the appliance and
check the roller brush for obstructions
or entangled hairs.
The adapter or battery may be
defective. Please contact the Consumer
Care Center or take the appliance to an
authorized Philips service center.