BHG 720-0783DC Mode D'emploi page 13

Fig.8
5. Side Burner Assembly
(a) Loosen (2) preinstalled Truss head screws from
right side of Firebox (A) as shown. Do not
screw out fully; leave ¼ extended for shelf
assembly. Through side burner shelf keyholes,
hang side burner shelf (M) on two loosened
screws. See Fig. 10.
(b) Using (3) Truss head screws (AA), (3) Flat
washer (DD), attach side burner shelf (M) to
Firebox from inside the firebox. Insert (2) Truss
head screws (BB), (2) Flat washer (EE) to
attach the side burner shelf front panel to the
control panel. Fully tighten the two loosened
screws to secure shelf to firebox.
Fig.9
Fig.10 Fig.1
13
A
A
M