Preparation; Assembly Instructions - BHG 720-0783DC Mode D'emploi

If you are missing hardware or have damaged parts after
unpacking grill, call 1-800-913-8999
for replacements.
To order replacement parts after using grill, call:
1-800-913-8999.
Before beginning assembly, make sure all parts are present. Compare parts with package contents list and
diagram above. If any part is missing or damaged, do not attempt to assemble the product. Contact
customer service at 1-800-913-8999 for replacement parts.
•Tools required for assembly:
Truss Screwdriver (not included)
•Note: The left and right sides of the grill are on your left and right as you face the front of the grill.

Assembly Instructions

CAUTION: While it is possible for one person to
assemble this grill, obtain assistance from another
person when handling some of the larger, heavier
pieces.
1. Use the parts list to check that all parts have been
included.
2. Inspect the grill for damage as you assemble it. Do
not assemble or operate the grill if it appears
damaged. If there are damaged or missing parts
when you unpack the shipping box, or you have
questions during the assembly process, please call 1-
800-913-8999
1. Caster and Tank Tray Assembly
Attach four casters to bottom panel (B) using
(16) Truss head screws with Locking Washer
(AA-1) and (16) Lock washers (DD).
Note: (E) is swivel caster, (D) is swivel caster
with brake, (C) are straight casters. See Fig.1.
Hint: For ease of cast assembly, turn bottom
panel upside down.
2. Side Panel Assembly
Attach left & right side panels (F & G) to bottom
panel (B) using (4) Truss head screws (AA). See
Fig.2.
Important: Use only parts listed above. When ordering
parts, providing the following information:
• Model #
• Serial # (found on the door inner of your grill)
• Part Number (see PART# in chart)
• Part Description
• Quantity of parts needed

Preparation

Fig.1
Fig.2
10
Truss Screwdriver
D
E
C
F
B
B
C
G