Installing The Ventilation System - Dometic Rm 7401 Mode D'emploi

6.4

Installing the ventilation system

L 100
To install the ventilation grilles, cut two rectangles (451mm x 156mm)
[17-3/4" x 6-3/20"] in the outer wall of the vehicle (for position of the cuts, see
point "6.3").
1. Seal the mounting frame, making it waterproof.
2. Insert the frame ...
3. Insert the ventilation grilles.
L 200
Item 1 does not apply for installation framess with an
integrated seal.
5. Clip the extractor insert in position
(only for upper ventilation system L100)
6. Insert winter cover
21
... and screw into position.
4. Lock the ventilation grilles.