Kohler K-1122 Guide page 2

16"
(40.6 cm)
1-1/4"
(3.2 cm)
11-1/4"
(28.6 cm)
2-1/2"
(6.4 cm)
1-1/2" OD
Product Information
Applicable product:
Drop-in rim style
Fixture*:
Bathing well
Basin area bottom 45-1/8" (114.6 cm) x 19-11/16" (50 cm)
Basin area top 52-3/4" (134 cm) x 25-5/16" (64.3 cm)
Weight 110 lbs (50 kg)
To overflow
Water depth 15" (38.1 cm)
Capacity 58 gal (219.5 L)
* Approximate measurements for comparison only.
Drop-in cutout dimensions:
58-1/2" (148.6 cm) x 30-1/2" (77.5 cm)
Pump: V
1-speed 120
Pump is supplied with 24" (61 cm) grounding-type plug-in
cord.
Minimum access panel
pump/control (required):
1063750-1-C
60" (152.4 cm)
3/4" (1.9 cm)
K-1122
Hz A
60 7
20" (50.8 cm) W x
15" (38.1 cm) H
No change in measurements if connected
with drain illustrated. (K-7272)
Pump/Control Access
20" (50.8 cm) W x 15" (38.1 cm) H
19"
(48.3 cm)
Required Electrical Service
Dedicated circuit required, protected with a Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control
Locate the outlet behind the whirlpool and within 24" (61 cm)
of the pump.
Notes
Install this product according to the installation guide.
Floor support under this product must provide for a minimum of
46 lbs/square foot (227 kg/square meter) loading.
This product is designed for drop-in installation only. It is not
suited for use in a three-wall alcove with an overhead shower.
The hot water supply should be 70% of the capacity of the bath or
greater. Installations will vary.
This fixture conforms to ANSI Standard Z124.1.2. All dimensions
are nominal.
2
1-1/2"
(3.8 cm)
Drop-in Rim Detail
32" (81.3 cm)
120 V, 15 A, 60 Hz
Kohler Co.