Festo CPX-Terminal -P Mode D'emploi page 17

English – Input module CPX-P-...
The CPX-P modules are intended for use only in variant P
CPX terminals. The CPX-P modules each consist of an elec-
tronics module which is fitted together with a combinable
connection block in a metal interlinking block. The maxim-
um values specified in the section "Technical specifica-
tions" must be observed during operation.
Detailed information can be found in the CPX-P module
description P.BE-CPX-P-EA-....
When dealing with the CPX-P-8DE-N-IS also observe the
corresponding special documentation.
Warning
• Before carrying out installation and maintenance
work switch off the following:
- compressed air supply,
- operating and load voltage supply.
• Connect an earth conductor of sufficient cable cross
section to the connection of the CPX terminal marked
with the earth symbol.
• The CPX-P modules contain electrostatically sensitive
components. Therefore, do not touch any
components. Observe the handling specifications for
electrostatically sensitive devices.
Note
Only commission a CPX terminal (-P) which has been
mounted and wired completely.
Festo CPX-P-EA 1209NH English 17