Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Thermistor Retainer
Thermistor
O-Ring
Mixer Valve
Reinstall the Thermistor Wiring Loom
Verify the O-ring is in place on the thermistor. Insert the
thermistor into the mixer valve housing and reinsert the locking
clip.
IMPORTANT! When fully inserted, the locking clip will snap
around the thermistor. Verify that the clip is secure or water leakage
will occur.
Secure the locking clip with the thermistor retainer and screw.
1062953-9-D
Screw
Locking Clip
12
Thermistor
Wiring Loom
Connector Tab
Grommet
Circuit
Board
Kohler Co.
Publicité
Table des Matières
