Publicité
Les langues disponibles
Les langues disponibles
CP 1210, CP 1260, CP 1290
Technical data
Machine data
Shank dimension
Type
CP 1210
Hex. 1x4¼ (25x108)
CP 1210 S
Hex. 1x4¼ (25x108)
Hex. 1
Hex. 1¼x6¼ (32x160**)
CP 1210 SVR
Hex. 1x4¼ (25x108)
Hex. 1
Hex. 1¼x6¼ (32x160**)
CP 1260
Hex. 1
Hex. 1¼x6¼ (32x160**)
CP 1260 S
Hex. 1
Hex. 1¼x6¼ (32x160**)
CP 1260 SVR
Hex. 1
Hex. 1¼x6¼ (32x160**)
CP 1290
Hex. 1
Hex. 1¼x6¼ (32x160**)
CP 1290 S
Hex. 1
Hex. 1¼x6¼ (32x160**)
CP 1290 SVR
Hex. 1
Hex. 1¼x6¼ (32x160**)
*) Also for 1
1
⁄
x6 in. (28x152 mm)
8
**) Also for 1
1
⁄
x6 in. (32x152 mm)
4
Noise and vibration declaration statement
Guaranteed sound power level Lw according to EN ISO 3744 in accordance with directive 2000/14/EC.
Sound pressure level Lp according to EN ISO 11203.
Vibration value A and uncertainty B determined according to EN ISO 28927-10. See table "Noise and vibration
data" for the values of A, B, etc.
These declared values were obtained by laboratory type testing in accordance with the stated directive or
standards and are suitable for comparison with the declared values of other tools tested in accordance with
the same directive or standards. These declared values are not suitable for use in risk assessments and values
measured in individual work places may be higher. The actual exposure values and risk of harm experienced
by an individual user are unique and depend upon the way the user works, in what material the machine is
used, as well as upon the exposure time and the physical condition of the user, and the condition of the
machine.
We, Atlas Copco Construction Tools AB, cannot be held liable for the consequences of using the declared
values, instead of values reflecting the actual exposure, in an individual risk assessment in a work place situation
over which we have no control.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed. An EU guide to
managing hand-arm vibration can be found at
http://www.humanvibration.com/humanvibration/EU/VIBGUIDE.html
We recommend a programme of health surveillance to detect early symptoms which may relate to vibration
exposure, so that management procedures can be modified to help prevent future impairment.
Additional vibration information
This information is provided to assist in making rough estimates of the vibration value in the workplace.
9800 1351 90 | Original instructions
*Always follow manufacturer instructions*
www.CrowderSupply.com • Toll Free: 888-883-5144
Weight
in. (mm)
lb (kg)
44 (20)
48.5 (22)
1
⁄
x6¼ (28x160*)
49.5 (22.5)
8
49.5 (22.5)
54 (24.5)
1
⁄
x6¼ (28x160*)
55 (25)
8
55 (25)
1
⁄
x6¼ (28x160*)
64 (29)
8
64 (29)
1
⁄
x6¼ (28x160*)
68 (31)
8
68 (31)
1
⁄
x6¼ (28x160*)
74 (34)
8
74 (34)
1
⁄
x 6¼ (28x160*)
82 (37)
8
82 (37)
1
⁄
x6¼ (28x160*)
86 (39)
8
86 (39)
1
⁄
x6¼ (28x160*)
96 (43.5)
8
96 (43.5)
*AAA Rent-All 225-291-1356*
Safety and operating instructions
Length
Blows
in. (mm)
bpm
21¼ (540)
1400
21¼ (540)
1400
23 (585)
1400
23 (585)
1400
23½ (600)
1400
25½ (650)
1400
25½ (650)
1400
26¾ (680)
1300
26¾ (680)
1300
26¾ (680)
1300
26¾ (680)
1300
29 (735)
1300
29 (735)
1300
28¾ (730)
1100
28¾ (730)
1100
28¾ (730)
1100
28¾ (730)
1100
31 (785)
1100
31 (785)
1100
Air
Consumption
cfm (l/s)
55 (26.5)
55 (26.5)
55 (26.5)
55 (26.5)
55 (26.5)
55 (26.5)
55 (26.5)
73 (34.5)
73 (34.5)
73 (34.5)
73 (34.5)
73 (34.5)
73 (34.5)
91 (43)
91 (43)
91 (43)
91 (43)
91 (43)
91 (43)
23
Publicité
