Cleaning And Maintenance; Emptying Dust Chamber - Beko BKS 5316 T Mode D'emploi

5 Cleaning and maintenance
Switch off and unplug the appliance ,before
cleaning it.
WARNING: Never use gasoline,
A
solvent, abrasive cleaning agents,
metal objects or hard brushes to
clean the appliance.
WARNING: To ensure consistent
A
performance of your vacuum
cleaner, it is recommended to clean
the filters and dust chamber after
each emptying.
A
WARNING: Always unplug the
vacuum cleaner before removing
the dust chamber.
A
WARNING: NEVER USE the
vacuum cleaner without ALL filters
attached.
5.1 Emptying dust chamber
1. Press the button "a" and lift the dust chamber
towards the direction "b" (Figure 6/1)
b
Figure 6/1
Vacuum cleaner / User manual
a
2. Hold the dust chamber over a bucket and
press the quick release button "a" to empty it
as described. When you have emptied all dust,
close the dust chamber flap (b), it will click when
closed. Later, place the dust chamber back.
(Figure 6/2)
Figure 6/2
5.2 Cleaning cyclone
separator
1. Rotate and pull the dust chamber compartment
to remove it from the cyclonic separator. (Figure
6/3)
Figure 6/3
2. Separator should be cleaned with a soft brush
and wiped with a damp cloth. The compartment
of dust chamber can be wiped to clean. (Figure
6/4)
Figure 6/4
3. Let it dry before replacing the separator.
9 / EN