Intended Use - Beko BKS 5316 T Mode D'emploi

3 Use

3.1 Intended use

The appliance was designed to be used in houses,
and is not fit for industrial use.
3.2 Motor thermostat
WARNING: Motor is equipped
with a thermal circuit breaker. If
the vacuum cleaner is overheated
for any reason, thermostat will
automatically step in to turn off the
A
product. In such a case, unplug the
vacuum cleaner and turn off the
product. Remove and empty dust
chamber. Clean the filters. Leave
the vacuum cleaner to cool down
for approximately 1 (one) hour. To
operate again, plug the product and
turn it on from the button.
3.3 Attaching flexible hose
A
WARNING: Always unplug the
vacuum cleaner before attaching or
removing the accessories.
• Install the flexible hose (Figure 3/1) to the air
inlet on the main body of the vacuum cleaner.
Make sure that sliding parts on the hose are
aligned. Press the product until the hose is
fastened with a click sound.
Figure 3/1
Vacuum cleaner / User manual
3.4 Using telescopic tubeh
1. Push the telescopic extension tube towards the
end of the handle. (Figure 3/2)
Figure 3/2
2. Telescopic tube can be extended or shortened
as necessary by pressing the button and sliding
it back and forth (Figure 3/3).
Figure 3/3
3. Attach the carpet brush to the end of telescopic
tube as shown.
7 / EN