Scale Removal - Honeywell HCM-890 Serie Mode D'emploi

Failure to remove the filter during cleaning will destroy the filter
STEP ONE:

SCALE REMOVAL

THE BASE
1. Fill the base with one cup (8 ozs, 250 ml)
of undiluted white vinegar
2. Let solution stand for 20 minutes
3. With the vinegar in the base, clean all
interior surfaces with a soft cloth or brush
to help remove scales.
4. Rinse the base thoroughly with water to
remove scale and cleaning solution.
PROLONGING THE LIFE OF THE FILTER AND MAINTAINING A CLEAN HUMIDIFIER
NOTE: DO NOT ATTEMPT TO CLEAN THE COOL MOISTURE FILTER WITH ANY CHEMICAL
SOLUTIONS, DOING SO WILL DAMAGE THE FILTER.
If the cool moisture filter appears to be clogged by hard water or mineral deposits, soak it in a sink full
of cool water for 10 minutes. DO NOT SQUEEZE OR WRING OUT THE COOL MOISTURE FILTER. Always
place it back in the humidifier wet.
There are many steps you can take each time you fill your humidifier to make sure you get the
most life out of the cool moisture filter.
1. Treat the cool moisture filter with care. DO NOT squeeze or wring it out, DO NOT clean the filter
using any chemical solution.
2. Always purchase Honeywell cool moisture filters (Filter C/HC-888) as the fan motor of this humidi-
fier and the cool moisture filter are designed to function efficiently as a set.
3. Be sure to empty water from the Water Tank and Base when not in use.
All manuals and user guides at all-guides.com
NOTE: Remove filter before cleaning
STEP TWO:
DISINFECTING
WATER TANK
1. Fill the water tank with:
• 1 teaspoon of household bleach
• 1 gallon (4 L) of water.
Pour some of this solution into the base.
2. Let solution stand for 20 minutes.
3. Rinse with water until the odor of bleach
is gone.
5