Dry Operation - Haier Hsm09Ru03/R2(Db) Mode D'emploi

Operation

Dry Operation

Remote controller
TEMP
HEALTH FAN
SWING
H AIR
MODE
SLEEP FRESH
CLOCK SET
TIMER
LOCK LIGHT CODE RESET
COOL operation starts when room
Ultra-low air flow
temp.is higher than temp.setting.
o
Temp.setting+2 C
Temp.setting
On reaching temp.setting +2
unit will run in mild DRY mode.
1. Unit start
Press on/off button ("
2.Select operation mode
Press MODE button. For each press, operation mode
changes as follows:
Remote controller:
Then Select DRY operation
3.Select temp.setting
Press TEMP. button
Every time the button is pressed, temp.setting
o
increase 1 C,if kept depressed, it will increase
rapidly
Every time the button is pressed, temp.setting
o
decrease 1 C,if kept depressed, it will decrease
rapidly
Select a desired temperature.
4.Fan speed selection
Press FAN button. For each press, fan speed changes as
follows:
Remote controller:
Air conditioner is running under displayed fan speed.
In DRY mode, when room temperature becomes
lower than temp.setting+2
at LOW speed regardless of FAN setting.
5.Unit stop
o Press on/off button ("
C
12
") on the remote controller, unit starts.
AUTO COOL DRY FAN
LOW
HI
MED
o
C,unit will run intermittently
"), the unit stops.
HEAT
AUTO