Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Key
Pushers: large and small
1
Feed tube
2
Lid
3
Shaft
4
Slicing disc
5
Finger grip
6
Dicing grid
7
Dicing disc
8
Finger holes
9
Slinger disc
10
Body
11
Food outlet
12
Gearbox assembly
13
Cleaning tool
14
To Assemble your
Dicing attachment
1 Place the slinger disc into the
body, ribs uppermost.
2 Hold the dicing disc by the
finger holes and fit on top of
the slinger disc. (The dicing
grid should be on the opposite
side to the food outlet with
the mark on the dicing disc
aligning with the mark on
the body
3 Hold the slicing disc by the
finger grip and push onto the
shaft
.
4 Fit the lid onto the body, line
up the
symbol on the lid
with the
on the body, then
turn to
symbol to lock into
place.
Fitting your
Attachment
Mincer
Release the locking screw
on the power unit by turning
anticlockwise (A) then slide
the gearbox assembly into
the outlet (B). Turn it both
ways until it locks into place.
Then turn the locking screw
clockwise to secure.
).
Stand Mixer
USE SPEED 4 TO MAX
Pull the catch (C) and remove
the slow speed outlet cover
(D). Hold the catch back and
insert the gearbox assembly
(E). Turn it both ways until it
locks into place. Release the
catch.
To Use your Dicing
Attachment
1 Connect the appliance to the
power supply and place a
bowl under the food outlet.
2 Choose which feed tube
you want to use. The pusher
contains a smaller feed tube
for processing individual items
or thin ingredients.
To use the small feed tube
- first put the larger pusher
inside the feed tube (F).
To use the larger feed tube
- use both pushers together
(G).
3 Put the food inside the
feed tube (refer to the
recommended usage chart
for suitable foods and their
preparation).
4 Switch on the appliance and
at the same time push down
evenly with the pusher –
never put your fingers in the
feed tube or use excessive
force.
5 Switch off and unplug.
3
Publicité
Table des Matières
