Specifications - Panasonic ES-SL83 Mode D'emploi

Remove the built-in rechargeable battery before disposing of
the shaver.
This figure must only be used when disposing of the shaver, and
must not be used to repair it. If you dismantle the shaver yourself, it
will no longer be waterproof, which may cause it to malfunction.
Remove the shaver from the AC adaptor.
Press the power switch to turn on the power and then keep
the power on until the battery is completely discharged.
Perform steps 1 to 6 and lift the battery, and then remove it.
Take care not to short circuit the positive and negative
terminals of the removed battery, and insulate the terminals
by applying tape to them.




16
PB013383 - ES-SL83_ (01EN)_05-19-16.indd 16

Specifications

Power source
Motor voltage
Charging time
This product is intended for household use only.


See the name plate on the AC adaptor.
(Automatic voltage conversion)
3.6 V
Approx. 1 hour
2016/5/27 14:53:56