Hitachi YUTAKI S80 Serie Manuel D'instructions page 13

GENERAL DIMENSIONS
3.2.2 Indoor unit TYPE 2 + Domestic Hot water tank beside the indoor unit

RWH-(4.0-6.0)(V)NFWE + DHWS(200/260)S-2.7H2E
Top view
Left side
Indoor unit
Service with this
space is possible
but, for an easier
servicing of some
components it is
recommended
to let a space
>500mm
5 PMML0344B rev.2 - 01/2021
(*2) Minimum distance for
piping connection back
outlet
Tank
Right side
>500mm (Min. distance
for E-box removal)
(*1) Recommended distance
between indoor unit and tank
may vary from 0 to 200 mm
Mark Part name
1 Flexible water pipe (x4)
2 Extension cables
3 Extension cables
4 Extension cables
5 Gasket (x5)
Front view
Option 1
Indoor unit at the
left side of tank
Dimensions according to the unit (mm)
Unit
RWH + DHWS200S-2.7H2E
RWH + DHWS260S-2.7H2E
Remarks
For heating coil inlet and outlet connections of indoor unit
and DHW tank
For tank electric heater
For tank thermistor
For unit controller
Gaskets (x5) for each flexible water pipe end (+1 for spare)
Option 2
Indoor unit at the
right side of tank
Units in mm.
Dimension "a"
1980
2289