Installing The Equipment - Groupe Atlantic CORPRIMO Serie Notice D'installation, D'utilisation Et D'entretien

A data plate listing all the information about the tank is located on the foot of the tank in line
with the thermometer and on the casing. Please take note of these details before contacting
After-Sales Service.
EN

3. INSTALLING THE EQUIPMENT

• Two lifting rings at the top of the tank allow it to be moved by crane. The 4,000 and
5,000 litre tanks have two additional lifting rings on the lower section.
• Position it as close as possible to the primary hot water heater.
• Ensure that the support element is correctly positioned to support the weight of the primary
tank when it is full of water.
• Install the retention tank with the drainer under the primary tank when it is placed in an
attic or above inhabited dwellings.
• The lower drain connection allows the tanks to be completely drained.
• The primary water tanks only work when in vertical position.
Three risers are provided to assist in connecting the drain:
Page 16 / 66 CORPRIMO / CORFLEX PRIMAIRE CP090495-D