Wacom STU-430 Guide Rapide page 9

Product specifications
STU-430
General Specifications
Model/Brand STU-430
Dimensions (W x D x H) 161.43 x 174.37 x 10.85 mm
Weight Main Body: 0.279 kg approximately
Operating temperature & humidity
5 to 40 degrees C, humidity: 30% to 80% RH
(non-condensing)
Storage temperature & humidity
-20 to 60 degree C, humidity: 30% to 90%
RH (non-condensing)
Interface cable USB Type A to mini B
Power consumption 1.0 W maximum
Display
Display panel FSTN Positive Reflective
Screen size 4.5 inch (95.985 x 59.985 mm)
Number of pixels 320 x 200
Pixel pitch 0.30 (H) x 0.30 (V) mm
LCD quality Each LCD panel is produced under very
stringent quality standards. Production
techniques cannot guarantee an absolutely
perfect display. Wacom does not allow any
pixel to be always white or always black. A
small number of pixels are allowed to show
a wrong color for some parts of the color
spectrum. This does not mean the display is
defective.
Pen tablet
Reading technology Electro-magnetic resonance technology
Active area 95.985 x 59.985 mm
Resolution 2540 lpi or 0.01 mm/pt
Accuracy ± 0.5 mm (center), the edge area 1 (20 mm
wide from edge of display area) to be
± 2.0 mm, the edge area 2 (3 mm wide from
edge of dsplay area) to be ± 4.0 mm
Reading height 5 mm or more (center)
Maximum report rate 200 points/sec
Pressure levels 1024 levels
Communication interface USB
Others
Security slot 1
STU-530
General Specifications
Model/Brand STU-530
Dimensions (W x D x H) 161.43 x 174.37 x 10.85 mm
Weight Main Body: 0.289 kg approximately
Operating temperature & humidity
5 to 40 degrees C, humidity: 30% to 80% RH
(non-condensing)
Storage temperature & humidity
-20 to 60 degree C, humidity: 30% to 90%
RH (non-condensing)
Interface cables USB Type A to mini B
Power consumption 2.5 W maximum
Display
Display panel Amorphous-TFT-LCD
Screen size 5.0 inch (108.0 x 64.8 mm)
Number of pixels 800 x 480, WVGA
Pixel pitch 0.135 (H) x 0.135 (V) mm
LCD quality Each LCD panel is produced under very
stringent quality standards. Production
techniques cannot guarantee an absolutely
perfect TFT display. Wacom does not allow
any pixel to be always white or always black.
A small number of pixels are allowed to show
a wrong color for some parts of the color
spectrum. This does not mean the display is
defective.
EN
7