Thrustmaster T248 Mode D'emploi page 17

Use the directional buttons (7) in this menu as follows:
Navigation
8 levels
PS/PC
Select your
system: PS4™
console, PS5™
3 options
console or PC
ABOUT
General
information
3 displays
FFB
Select the Force
Feedback profile
(see FFB
PROFILE
3 options
DIAGRAM section)
FORCE
Select the overall
wheel's force effect
level
6 options
ROT°
Select the angle of
rotation
(only for games in
which the angle of
6 options
rotation is not
automatic)
PEDAL
Select the pedal
set configuration
2 options
TEMP
1 display
Motor temperature
RESET
Reset the racing
wheel to default
mode.
1 option
Screen
- Selection of PS4™ console (by default)
- Selection of PS5™ console
- Selection of PC
Note: To validate your system choice,
press the MODE button (9). Selection will
be saved when EXIT appears on screen.
- Firmware version of racing wheel base
- Name of device connected to mini-DIN
connector (23)
- Type of pedal set connected to RJ12
connector (24)
- FFB 1
- FFB 2 (by default)
- FFB 3
- 270°
- 360°
- 540°
- 720°
- 900°
- AUTO = Automatic (by default)
- FLOOR: floor position (by default)
- INV.: suspended position
(the accelerator and clutch pedals are
reversed)
Racing wheel's motor temperature displayed in
real time
- N: No
- Y: Yes
Select Y, then press the MODE button (9). The
racing wheel is reset when EXIT appears on
screen.
16/32
Information / Options