Publicité
Les langues disponibles
Les langues disponibles
Mode switch and mode keys
3
The mode switch can be operated by inserting one of the two supplied mode keys - manager (MA) and operator
(OP) keys. These keys can be inserted or removed only in the "REG" or "
REG
OP
X/Z
PGM
Manager key (MA)
Operator key (OP)
Displays
4
Operator display
PLU
DEPT
REPEAT
RCPT
OFF
Amount:
Appears in the far-right eight (max.) positions. When the amount is minus, the minus symbol "-"
appears before the amount.
Number of repeats for repetitive registrations:
The number of repeats is displayed, starting at "2" and incremented with each repeat. When you
have registered ten times, the display will show "0."(2 → 3 ..... 9 → 0 → 1 → 2 ... )
Receipt function status:
The indicator "_" appears in the ninth position when the receipt function is in the OFF status.
Time:
Appears in the first to fifth positions (using 24-hour format) in the OP X/Z, REG,
mode. In the REG,
Machine state symbols (appears in the tenth place)
:
Appears during programming.
:
Appears when an error is detected.
:
Appears when the subtotal is displayed or when the amount tendered is smaller than the sale amount.
:
Appears when the
:
Appears when a transaction is finalized by pressing the
:
Appears when the change due amount is displayed.
:
Appears when the voltage of the installed batteries is under the required level. You must replace them
with new ones within two days. Refer to page 37 for details.
:
Appears when the batteries are not installed, or the installed batteries are dead. You must replace
them with new ones immediately. Refer to page 37 for details.
Downloaded from:
http://www.usersmanualguide.com/
The mode switch has these settings:
:
MGR
X
/Z
1
1
OP X/Z:
X
/Z
2
2
REG:
PGM:
:
MGR:
X1/Z1:
X2/Z2:
cashier code
, or MGR mode, press the
e
key is pressed to calculate a subtotal in foreign currency.
This mode locks all register operations. (AC power becomes off.)
No change occurs to register data.
To take individual cashier X or Z reports, and to take flash reports.
And it can be used to toggle receipt state "ON" and "OFF" by
Ü
pressing the
key.
For entering sales.
To program various items.
Enters into the void mode. This mode allows correction after
finalizing a transaction.
For manager's entries. The manager can use this mode for an
override entry.
To take the X/Z report for various daily totals
To take the X/Z report for periodic (weekly or monthly)
consolidation
Customer display (Pop-up type)
Ñ
key to display the time.
É
'
,
" position.
î
or
key.
, or MGR
5
Publicité
