VANTRUE Element 1 Mode D'emploi page 28

Note:
If the dash cam continues to be hit during collision detection recording,
it will exit the collision detection mode and enter normal recording,
EN EN
restarting the 5-minute entry mechanism.
Motion Detection
When the motion detection is turned on, the
the recording interface, indicating that the dash cam is currently in
motion detection mode. Motion detection has three levels of low/medi-
um/high that can be adjusted, and the corresponding detection ranges
for motion detection is 6.6ft/13ft/19.7ft.
When the motion Detection is turned on, and no movement is detected
after 5 minutes of recording, then an orange icon will appear in the
center of the screen, and the screen will turn off after 3 minutes.
Video recording process: When the camera detects object movement
or car vibration, it will automatically trigger video recording. E1 comes
with a pre-recording function. When the motion detection recording is
over, the camera will load the pre-recorded video into the motion
detection video and save it to the normal folder.
2560x1440P 30FPS
120
00:00:37
08-20-2022 14:09:07 MP/H
- 24 -
icon will be displayed on