Guarantee And Service; Ordering Accessories - Philips HR1870 Mode D'emploi

5 Clean the motor unit and the gear box with a damp cloth.
Never immerse the motor unit and the gear box in water nor rinse them under the tap.
Never clean the gear box in the dishwasher.
storage
1 Store the mains cord in the cord storage facility by winding it round the base of the
motor unit.
Caution: Do not hold the appliance by the locking arm or spout when you carry it.
Environment
- Do not throw away the appliance with the normal household waste at the end of its life, but
hand it in at an official collection point for recycling. By doing this, you help to preserve the
environment (Fig. 28).

guarantee and service

If you need service or information or if you have a problem, please visit the Philips website at
www.philips.com or contact the Philips Consumer Care Centre in your country. You find its
phone number in the worldwide guarantee leaflet. If there is no Consumer Care Centre in your
country, go to your local Philips dealer.

ordering accessories

To purchase accessories for this appliance, go to your Philips dealer or a Philips service centre. If you
have any difficulties obtaining accessories for your appliance, please contact the Philips Consumer
Care Centre in your country. You find its contact details in the worldwide guarantee leaflet. You can
also visit www.philips.com/support.
troubleshooting
This chapter summarises the most common problems you could encounter with the appliance. If
you are unable to solve the problem with the information below, contact the Consumer Care
Centre in your country.
Problem
The juicer does not
work.
The juicer stops during
use.
The juicer slows down
during use.
All manuals and user guides at all-guides.com
Solution
The appliance is equipped with a safety system. If the parts have not
been assembled correctly, the appliance does not work. Switch off the
appliance and check whether the parts have been assembled in the
right way.
The juicer is overheated. Switch off and unplug the appliance. Remove
the pulp from the integrated pulp container. Wait until the appliance
has cooled down. Then press the overload protection button on the
bottom of the motor unit.
The integrated pulp container has reached its maximum capacity.
Switch off the appliance and remove the pulp from the integrated pulp
container.
EnglisH
13